Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterHorizontal Roller & Sliding Impact Windows in Naples, FL
Horizontal roller and sliding impact windows are impact-rated, multi-lite window units where one or more sashes glide horizontally on a track rather than swinging outward or tilting inward. In Naples, they’re the practical choice for bedrooms, kitchens, and great rooms where a casement would swing into a patio, a walkway, or a piece of furniture – and where Florida Building Code requires Miami-Dade or Florida Product Approval-rated protection against hurricane-force wind and debris. A properly installed sliding impact window does two things at once: it meets the code, and it fits the way the room actually works.
If you’re looking at the broader category, our Impact Windows & Doors in Naples page covers the full range of products and configurations we install. This page focuses specifically on horizontal rollers and sliders – what they cost in the Naples market, what the installation process looks like, and the questions homeowners ask us most often before they sign anything.
Dale Kessler and the TruePane crew have been setting glass in Collier County for over 42 years. We’re an authorized installer for CGI and ES Windows, among more than a dozen other manufacturer lines, and every sliding impact window job we do is covered by The Keystone Standard: both warranty layers registered in writing before the truck leaves the driveway. A live person answers (239) 326-9942 around the clock, every day of the week – not a voicemail tree, not a form submission.
When You Need Horizontal Roller & Sliding Impact Windows
Not every opening calls for a slider, but when the geometry is right, there’s no better fit. Here are the situations where Naples homeowners typically come to us for this specific product:
- Your current windows failed a wind mitigation inspection. Older aluminum single-pane sliders – especially the builder-grade units installed across East Naples and Golden Gate Estates through the 1980s and 1990s – typically carry no Miami-Dade product approval. Replacing them with rated impact sliders can directly improve your wind mitigation report and, in many cases, lower your homeowner’s insurance premium.
- A casement or awning window isn’t practical in your space. If the opening faces a covered lanai, a narrow side yard, or sits above a kitchen counter, a sash that projects outward creates a clearance problem. A horizontal roller opens without projecting past the frame plane at all.
- You’re opening the wall in a remodel. A number of Aqualane Shores and Port Royal homeowners we work with enlarge openings during renovations to bring in more Gulf light. Sliders scale up well – we install two- and three-lite configurations in openings up to 96 inches wide – and they accommodate larger glass areas that fixed-lite windows can’t provide for ventilation.
- Your existing sliders are difficult to operate. Worn rollers, corroded tracks, and off-level frames are common in coastal homes that have seen fifteen or more hurricane seasons. If the sash drags, jumps the track, or won’t latch properly, the window is not meeting its designed protection level regardless of what the old product approval sticker says.
- You need natural cross-ventilation without storm risk. Naples summers average over 55 inches of annual rainfall and frequent fast-moving squalls between June and October. A sliding impact window stays put through wind-driven rain without requiring you to rush to close it the way a crank casement does – and it can be left partially open in light rain without the sash acting as a scoop.
- You’re combining shutters with impact glass and want to simplify. A number of homeowners in Pelican Bay and Tiburon run accordion shutters on some openings and want a clear-view impact solution on others, especially street-facing or pool-facing elevations. Sliding impact windows eliminate the shutter deployment step on those openings entirely.
Our Horizontal Roller & Sliding Impact Windows Process
We do not subcontract our measurement visits to a third-party estimator. Dale Kessler built TruePane on the principle that the person who measures the opening should understand exactly how the frame is going to land in it – and that principle hasn’t changed. Here’s how a typical sliding impact window project runs from the first call to the final walkthrough:
- In-home measurement and manufacturer comparison. We schedule a visit at a time that works for you. Our technician measures every opening twice, documents the rough opening, existing frame condition, wall depth, and any out-of-plumb or out-of-level conditions that will affect the fit. We then quote at least two manufacturer lines side by side on paper – for sliding impact windows in Naples, that frequently means comparing CGI and ES Windows configurations – so you can see exactly what you’re buying and why the pricing differs.
- Product selection and permit application. We handle the permit pull with Collier County. Florida Building Code requires a permitted installation for impact window replacements, and the permit is what creates the paper trail that protects your home’s value at resale. We submit the Florida Product Approval number with the application and track the permit through issuance – you don’t have to follow up with the building department yourself.
- Factory order and lead-time communication. Sliding impact windows are custom-sized to your opening. Current lead times from CGI and ES Windows for Naples-area orders typically run four to eight weeks depending on configuration and glass package. We give you a realistic number at the time of order confirmation, not an optimistic one we’ll have to walk back later.
- Installation day. Our uniformed, background-checked installers arrive during the window we committed to. The existing sash and frame come out, the opening is inspected for rot, water intrusion, or masonry damage that wasn’t visible during measurement, and the new frame goes in plumb, level, and square – because if the pane is not true, the job is not done. We bed the frame, seal the perimeter per the manufacturer’s installation specification, and test every sash for smooth operation and positive latch engagement before we move to the next opening.
- Inspection and certificate of completion. We schedule and attend the county inspection. When the inspector signs off, you receive a copy of the approved permit and the inspection record. This is the document your insurance carrier and any future buyer will ask to see.
- Warranty registration under The Keystone Standard. Before the truck leaves the driveway, both manufacturer warranty layers – the glass package and the frame/hardware – are registered in writing with durations stated. You receive a copy. Our own 90-Day Done Right Promise runs from the same date: if anything about the installation is not right within 90 days, we make it right with no paperwork, no arguing, and no fine print that suddenly covers neither party.
Horizontal Roller & Sliding Impact Windows Pricing in Naples
Sliding impact windows in Naples typically run between $650 and $1,800 per opening installed, depending on size, glass package, frame finish, and site conditions. That range is wide because a 36-by-48-inch two-lite slider in a standard masonry opening is a very different job from a 72-by-60-inch three-lite configuration in a custom home with deep-profile framing. The table below shows the ranges we see most often in the Naples market:
| Configuration | Approximate Installed Range (Naples) |
|---|---|
| Standard two-lite slider, up to 48″ wide | $650 – $950 per opening |
| Mid-size two-lite slider, 48″-72″ wide | $900 – $1,300 per opening |
| Large two- or three-lite slider, 72″-96″ wide | $1,200 – $1,800 per opening |
| Low-E or specialty glass upgrade | $80 – $200 additional per opening |
| Frame finish upgrade (bronze, white, custom) | $50 – $150 additional per opening |
A few things move the number up or down in a meaningful way:
- Opening count. A whole-home replacement of eight to twelve openings carries lower per-unit installation cost than a single window swap. We’ll tell you this plainly on the quote.
- Existing frame condition. Coastal homes in Naples, particularly those within a mile of the Gulf in neighborhoods like Moorings and Coquina Sands, sometimes show moisture intrusion or spalled concrete that wasn’t visible until the old frame came out. We document what we find and give you a straight number before proceeding – no surprise line items on the bill after the fact.
- Permit and inspection fees. Collier County permit fees for window replacement projects vary by valuation. We include the permit cost in the quote rather than presenting it as a separate line item after you’ve signed.
- Glass package. Standard impact laminates meet code. Low-E coatings add solar heat rejection, which matters in a home that faces south or west across open water. We explain the payback math in plain terms – not as a sales tactic, but because the choice affects your energy bill for twenty years.
If you qualify for our senior or veteran discount, you receive 5% off the total – that applies to materials and labor both, no ceiling. And if any repair component of the project exceeds $250, the standing $50 off repair credit applies. We’ll apply it automatically; you don’t need to ask.
Estimates are free and there’s no obligation. Call (239) 326-9942 and a live person will set up your measurement visit.
FAQs – Horizontal Roller & Sliding Impact Windows
Do sliding impact windows meet Florida Building Code for Naples?
Yes – sliding impact windows with a valid Florida Product Approval (FPA) number meet Florida Building Code requirements for hurricane protection in Collier County, provided they are installed under a permit and pass the required inspection. The FPA number appears on the product label and in the permit application; it’s what your insurer and the county inspector look for. CGI and ES Windows both carry current Florida Product Approvals for their sliding impact lines. We pull the permit, submit the documentation, and attend the inspection – you don’t have to manage that process yourself. Call (239) 326-9942 if you want to confirm product approval status for a specific configuration before committing.
How long does a sliding impact window installation take?
Most residential sliding impact window replacements in Naples take one full day for a typical order of four to eight openings. Larger whole-home projects or homes with non-standard framing may run into a second day, but that’s the exception rather than the rule. What takes longer is the period between your signed agreement and installation day – custom-sized sliding impact windows are built to order, and current factory lead times from our Naples-market suppliers generally run four to eight weeks. We give you a straight timeline at order confirmation. Once installation day arrives, we complete the work in a single visit in the large majority of cases.
Can I leave a sliding impact window partially open during a storm?
No. An impact window’s protection rating applies only when the sash is fully closed and latched. The laminated glass and reinforced frame assembly is designed to resist debris impact and wind pressure as a sealed unit. Leaving a sash partially open during a named storm or a severe squall means the opening is unprotected. For ventilation during normal Naples weather – including the fast-moving afternoon thunderstorms common from June through September – a partially open slider is fine. But when a watch or warning is posted, every sash goes closed and latched. If any of your sliders are difficult to latch fully, that’s a service call worth making before storm season, not during it. Call us at (239) 326-9942 and we’ll take a look.
Is it worth replacing just one or two sliders, or should I do the whole house?
Replacing one or two windows is worth doing if those openings are the ones that have failed or are clearly out of compliance – a cracked sash, a broken latch mechanism, or a window with no product approval on a critical elevation. A partial replacement gives you rated protection on those specific openings. That said, whole-home replacement in Naples is often the more practical decision for two reasons: the per-unit installation cost drops when we’re doing multiple openings in a single mobilization, and your wind mitigation inspection report reflects the weakest opening in the house. If six windows are rated and two are not, the inspector has to note the unrated units. We’ll tell you honestly which path makes more sense for your specific home after we measure. The estimate is free either way – call (239) 326-9942 to schedule.
Why Naples Homeowners Call TruePane for This Work
Dale Kessler started TruePane in 2008 on a straightforward idea: out-of-true installs and voided warranties were problems worth fixing permanently, not papering over with apologies. That founding rule – if the pane is not true, the job is not done – is still on the whiteboard, and it still governs every sliding impact window we set in Naples.
We are not the cheapest bid in the room, and we don’t try to be. What we offer is a square deal: upfront pricing, authorized manufacturer product from lines including CGI and ES Windows, permitted installation by background-checked technicians, and both warranty layers registered in your name before we leave. The 90-Day Done Right Promise means that if something about the installation is not right within 90 days of completion, we make it right – no paperwork, no arguing, no reading the fine print to find the clause that covers neither party.
Over 42 years of work in communities across Southwest Florida, the company Dale built has earned a reputation by doing the same thing on every job: measuring twice, quoting straight, and standing behind the result. We hire local and train apprentices into journeymen because we plan to still be in this community when those apprentices are running their own crews. That’s not a positioning statement – it’s the reason we answer the phone at 2 a.m. when a window seal fails the night before a storm.
If you’ve had a contractor leave you with a fogged seal and a door that binds in July, you know exactly what this page is describing. The work we do on TruePane Windows & Doors jobs is meant to be the last call you have to make on that window.
Key Takeaways
- Horizontal roller and sliding impact windows meet Florida Building Code when installed with a valid Florida Product Approval and a Collier County permit.
- Installed pricing in Naples typically runs $650 to $1,800 per opening depending on size, glass package, and site conditions.
- Factory lead times for custom-sized units currently run four to eight weeks; most installations complete in a single day.
- TruePane registers both manufacturer warranty layers in writing before leaving the job site – The Keystone Standard on every project.
- The 90-Day Done Right Promise covers workmanship with no paperwork and no arguing if something isn’t right.
- Seniors and veterans receive 5% off all labor and materials; $50 off any repair component over $250 applies automatically.
- A live person answers (239) 326-9942 at any hour – call to schedule a free, no-obligation measurement visit.
Schedule Your Free Estimate in Naples
If you’re ready to replace aging sliders with properly rated, permitted sliding impact windows, or if you just want a straight answer about what it would cost and how long it would take, call (239) 326-9942. A live person will pick up and schedule your measurement visit at a time that works for your day. No forms, no callback queues, no waiting. We serve Naples and the surrounding Collier County area, and we’ve been doing this work long enough to know that the homeowners who call us are paying close attention – which means we’d better show up prepared and tell the truth. That’s what we do.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Naples.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.