Mr-Glass Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

Mr-Glass Shingle, Tile & Metal Roofing in Naples: What to Know First

We handle Mr-Glass shingle, tile, and metal roofing repairs and replacements for homeowners throughout Naples, FL. Most Mr-Glass roofing jobs in this market run between $400 and $4,800 depending on scope, and we typically complete repair work within three to five business days after the estimate. Call (239) 326-9942 for a free on-site estimate.

Call (239) 326-9942

This page is for Mr-Glass owners in Naples who have a shingle, tile, or metal roof that is leaking, lifting, rusting, or showing age. If you own a Mr-Glass roof and want to know what is actually wrong, what it costs to fix, and whether it is worth repairing or replacing, you are in the right place. We are an independent Mr-Glass service provider, not a factory warranty center. That means we tell you what the roof needs, not what the manufacturer will pay for.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass roofing systems hold up reasonably well in Southwest Florida, but we see the same failure patterns repeat across Naples neighborhoods, from Golden Gate to Pelican Bay. Here are the five we run into most often:

• Tile underlayment rot at the eave line. On Mr-Glass barrel tile roofs, the felt or synthetic underlayment breaks down first where water backs up during heavy summer storms. By the time a homeowner sees a ceiling stain in the living room, the underlayment along the bottom two courses of tile has usually been wicking moisture for a year or more. The decking underneath can be spongy, which means pulling tile, replacing a section of plywood, and laying new underlayment before the tile goes back.
• Shingle tab seal failure on the Mr-Glass architectural shingle line. The adhesive strip on these shingles loses grip after prolonged exposure to Naples heat and salt air, especially on south-facing roof planes. Shingles lift in the afternoon sea breeze and never reseat. We see this most often on homes built between 2006 and 2012 along the Gordon River corridor. The fix is resealing where the mat is still sound, and replacing shingles in a matching color blend where granules have worn through.
• Metal roof panel screw withdrawal on Mr-Glass standing seam profiles. Over time, thermal expansion and contraction works the gasketed screws loose on older Mr-Glass metal installations. Once a screw backs out even a quarter inch, the neoprene washer loses compression and water finds the fastener hole. We remove, inspect, and replace each screw with a properly sized, new gasket washer, and we check the panel seams before we call it done.
• Flashing separation at chimney and skylight penetrations. Mr-Glass flashing details are not the problem on their own. The issue is the Naples combination of salt air corrosion and the flexing that happens when a roof deck swells and shrinks through wet and dry season. We pull the old flashing, inspect the penetration, install new step and counter-flashing with proper lap, and reseal with a marine-grade sealant rated for coastal exposure.
• Valley corrosion on Mr-Glass metal valleys beneath tile. When Mr-Glass tile roofs were installed over galvanized valley metal rather than copper or a heavy-gauge aluminum, the salt air eventually eats through at the bottom of the valley where debris sits after a storm. Water bypasses the valley and drops straight onto the underlayment. The repair is replacing the valley metal with a heavier gauge, then reinstalling tile over it with proper overlap.

Our Mr-Glass Shingle, Tile & Metal Roofing Process

Every Mr-Glass roof we take on in Naples follows the same sequence. No shortcuts, no surprises:

1. 1
   The roof inspection. We walk the entire roof, document what we find with photos, and give you a written report of what is failing, what is holding up, and what is next in line. You see what we see.
2. 2
   The parts decision. On Mr-Glass repairs, we discuss OEM versus quality aftermarket components with you before any work begins. In our experience, aftermarket replacement tiles and shingles from reputable distributors often match Mr-Glass color and profile more reliably than OEM stock that has aged differently on the roof. We show you both options in writing.
3. 3
   The repair or replacement. We pull only what needs pulling, keep a clean work area, and protect the landscaping below. Decking gets replaced where it is soft. Underlayment gets installed to current Florida building code.
4. 4
   The water test. Before we leave the job, we run water on the repaired area and check for leakage. If it leaks, it is not done.
5. 5
   The walkthrough. We take you up on a ladder if you want to see the work, and we review the warranty terms on the repair in plain English.
6. 6
   The cleanup. We magnet-sweep for nails, remove old materials, and leave the property the way we found it, minus the roof problem.

What Mr-Glass Shingle, Tile & Metal Roofing Costs in Naples

Here is what we charge in the Naples market for common Mr-Glass roofing work:

• Single tile replacement, including labor and tile match: $75 to $150
• Shingle section repair, 10 to 30 square feet: $400 to $950
• Valley metal replacement, per valley: $500 to $900
• Flashing replacement at one penetration: $250 to $600
• Metal roof screw and gasket replacement, per 100 linear feet: $800 to $1,400
• Full tile roof tear-off and replacement, per square: $850 to $1,250
• Underlayment replacement on a tile roof section: $700 to $1,800 depending on decking condition

What moves the price is the condition of the decking underneath, whether the roof is a two-story or has a steep pitch, and whether any of it falls under a current building code trigger that requires bringing things up to standard. We give you a line-item written estimate before any work starts. Call (239) 326-9942 for a free estimate.

Why Naples Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We have been doing this in Naples long enough to know the difference between a roof that looks bad and a roof that is failing. Dale Kessler started this company out of the principle that out-of-true work and voided warranties were problems worth fixing permanently. That holds on a Mr-Glass roof repair just as it does on a window install. Every job gets the 90-Day Done Right Promise: if it is not right when we leave, we come back until it is.

We are not the manufacturer. We do not pretend to be. What we are is a local building products company that also works on PGT, CGI, CWS, and ES Windows systems, so we see how different manufacturers’ products behave in the same Naples climate. That cross-brand experience helps us diagnose Mr-Glass roofing problems faster, and fix them correctly the first time.

FAQs