Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Shingle, Tile & Metal Roofing in Naples: What to Know First
We repair and replace ES Windows shingle, tile, and metal roofing throughout Naples as an independent ES Windows service provider. Most shingle roof work on ES Windows homes takes one to two days once materials are on site; tile and metal jobs run longer depending on the scope. You can expect straightforward pricing with no change orders slipped in after the fact, and every job backed by our 90-Day Done Right Promise.

This page is for Naples homeowners who have ES Windows products already installed and need roofing work done around them, or who are planning a roof project and want to know how it affects their windows. If that’s you, call (239) 326-9942 and a live person will answer.
How ES Windows Products Fail - and How We Fix Them
- ES Windows ES70 Impact Series: sill flashing separation on shingle roofs. We see this on Gulf Shore Boulevard and Park Shore homes where shingle replacements were done fast and the step flashing was never properly lapped under the window nailing flange. Water tracks down the flashing, pools at the sill, and rots the rough opening from the bottom up. We pull the lower course of shingles, reset the flashing, and seal the sill with a polyurethane caulk rated for coastal salt exposure before reinstalling.
- ES Windows ES50 Single-Hung: leak at the top corner where tile roof valleys meet the frame. Tile roofs in Naples shed water in concentrated streams at valley intersections. If the valley flashing is cut too short or not turned up high enough at the window, wind-driven rain gets behind the frame. The first symptom is a water stain on the interior drywall above the window, not directly at the glass. We extend the valley metal, install a proper divertor, and reflash the top of the window so water never touches the frame.
- ES Windows ES-100 Casement and Awning: frame racking on metal roofs with insufficient expansion joints. Metal roofs move more than shingle or tile in Naples heat. If the roof was installed without proper expansion joints near the window wall, the roof sheet pushes against the rough opening and racks the frame. The window still opens, but with resistance, and the sash seal starts to fail at one corner. We coordinate with the roofing contractor to add the expansion joint, then reset and true the frame before resealing.
- ES Windows Louvre/Blade systems: weep hole clogging from tile roof debris. Tile roofs shed granules, especially after storms. Those granules wash down and clog the weep holes on louvred ES Windows units, which traps water inside the frame track. The window drains slowly or not at all, and you hear water sloshing after rain. We clear the weep system, verify the drainage channel is pitched correctly, and install fine mesh weep guards that keep granules out without blocking water flow.
- ES Windows Fixed Picture Windows: seal failure accelerated by roof heat reflection. A fixed ES Windows unit facing a low-slope shingle roof or metal roof in Naples gets hit with reflected heat most of the day. The insulated glass unit seal fails, fog develops between panes, and the window loses its clarity. We replace the IGU using a manufacturer-spec gas fill and edge seal, then remount the frame with a thermal break against the rough opening so the problem doesn’t return in three summers.
Our ES Windows Shingle, Tile & Metal Roofing Process
- 1
Call and diagnosis. You call (239) 326-9942, a live person answers, and we schedule a time that works. A background-checked technician shows up in uniform, measures the window openings and the roof interface, and documents what’s failing.
- 2
Written findings. We put the diagnosis on paper. What’s wrong, why it happened, and what it takes to fix. No verbal handshakes, no mystery scope.
- 3
Parts decision. For ES Windows work, we determine whether an OEM part is required to preserve the manufacturer warranty or whether a quality aftermarket part does the job without voiding anything. We quote both options side by side when it makes sense.
- 4
The work. We coordinate with your roofer if shingle, tile, or metal work is already scheduled, or we handle the interface work ourselves if the roofing is already in place. Every opening is measured twice before anything is removed.
- 5
Test and verify. We check the seal, the drainage, the operation, and the flashing. If the pane is not true, the job is not done.
- 6
Paperwork before we leave. Both manufacturer warranty layers are registered in writing, durations stated, before the truck leaves the driveway. Then you get our 90-Day Done Right Promise in writing.
What ES Windows Shingle, Tile & Metal Roofing Costs in Naples
Shingle roof interface work on an ES Windows home in Naples typically runs $275 to $650 per window opening, depending on how much flashing has to be rebuilt and whether the rough opening needs repair. Tile roof work ranges from $450 to $1,100 per window because tile valleys demand more time and materials. Metal roof interface corrections run $500 to $1,200 when expansion joints are involved. Full IGU replacement on a fogged ES Windows fixed unit runs $380 to $800 depending on size and gas fill.
What moves the price: how much of the existing flashing is salvageable, whether the rough opening wood has rot, and whether we’re coordinating with an active roofing crew or doing the interface work after the roof is already down. Call (239) 326-9942 for a free estimate with line-item numbers on paper before you decide anything.
Why Naples Homeowners Call TruePane Windows & Doors for ES Windows Work
We’re not a franchise. Dale Kessler founded this company in 2008 after learning the trade from his father in Columbus and spending two decades setting windows before relocating to Southwest Florida. His crews have worked throughout Naples for years, including impact-glass replacements along the Gulf Shore Boulevard corridor, so we know exactly what salt air and storm pressure do to a poorly seated frame. We also service PGT, CGI, CWS, and ECO Window Systems, which means we’re not trapped into one manufacturer’s parts network. If it is not right when we leave, we come back until it is.
FAQs
Roofing work that disturbs the window flashing, the nailing flange, or the sill pan can void the water-penetration portion of your ES Windows warranty if the flashing is not restored to the manufacturer’s installation spec. We document every repair so you have written proof the interface work was done correctly, which protects you if a warranty claim comes up later. Call (239) 326-9942 if you want us to look at your specific setup.
Yes, for most current ES Windows lines we can source exact-match frame components, and for discontinued or older series we match the profile and finish with a quality aftermarket option that we disclose on the quote before any work starts. The goal is that you can’t tell where the repair was made. Call (239) 326-9942 and we’ll tell you what’s available for your model.
We answer the phone live 24 hours a day and we’ll schedule you for the next available opening. Leaks around windows after a roof job don’t fix themselves, and the longer water sits in the rough opening, the more the repair costs. Call (239) 326-9942 and we’ll get a technician out to look at it.
When the roof is already being replaced, we prefer to do the window interface work at the same time so the flashing is integrated properly instead of retrofitted. We coordinate directly with your roofing contractor so nothing gets missed between trades. Call (239) 326-9942 and we’ll work out the sequence with whoever is on your roof.
If the frame is racked, the sill is rotten, or the seal has failed on an insulated glass unit that’s more than fifteen years old, replacement usually costs less over the long run. If the frame is sound and only the flashing or the IGU is compromised, repair is the better call. We’ll show you both numbers on paper and let you decide without pressure. Call (239) 326-9942 for that estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Naples and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After