Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Pelican Bay
Window replacement in Pelican Bay almost always runs through two offices before the first pane is ordered: the Pelican Bay Foundation’s Architectural Review Committee and Collier County’s permit desk. We know both processes well enough to keep your job moving without a stop-work order. If you’re replacing original aluminum-framed windows or sliding glass doors in a Gulf-front tower or a single-family estate home off Pelican Bay Boulevard, call us at (239) 326-9942. We’ll measure, quote manufacturer lines side by side on paper, and walk the approvals with you.
Pelican Bay is not like the surrounding Naples neighborhoods. The community was built largely before Florida’s post-Hurricane Andrew impact glazing rules took effect, which means most original windows are single-pane or early laminated units now decades past their service life. Replacing them correctly means clearing the Foundation’s design review and meeting Collier County’s coastal wind-load requirements at the same time. We have done it enough times that the dual-approval sequence is built into our workflow, not an afterthought.
Why TruePane Windows & Doors Is Pelican Bay’s Preferred Window Replacement Company
Dale Kessler founded TruePane in 2008 after years in the glazing trade, with one rule on the whiteboard: if the pane is not true, the job is not done. That rule governs every install we run in Pelican Bay. We are an authorized installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows. When we quote your Pelican Bay project, you see the product lines side by side on paper so you know exactly what you’re buying and why.
We work in Pelican Bay regularly enough that our crews know the Foundation’s product-spec expectations before they park the truck. Background-checked, uniformed technicians measure every opening twice. Both manufacturer warranty layers get registered in writing before we leave the driveway. And if something isn’t right within 90 days, we make it right with no paperwork and no arguing. That’s the 90-Day Done Right Promise, and it is the baseline on every Pelican Bay job.
Our customers in Pelican Bay tend to have lived in their homes for twenty years or more. They’re not shopping for the cheapest bid. They want a company that answers the phone when a west-facing high-rise unit starts showing salt corrosion on the hardware and fog between the glass. A live person answers at (239) 326-9942 twenty-four hours a day, seven days a week. Not a voicemail tree, not a regional call center.
One thing worth knowing up front: upper-floor condo work in Pelican Bay is not a ladder-and-scaffold job. We have run swing-stage rigs on Gulf-front towers along Pelican Bay Boulevard, replacing original aluminum sliders with PGT impact-rated glazing while working off a balcony. We plan the rigging, the staging, and the elevator schedule before the units arrive, so the common areas stay intact and the job finishes without damage claims.
Our Window Replacement Services in Pelican Bay
Full Frame Replacement
Full frame replacement means the entire window comes out, including the frame, sill, and trim. In Pelican Bay’s older towers and estate homes, this is often the only correct choice when original aluminum frames have corroded or bowed from decades of salt air and coastal movement. We remove the old frame down to the rough opening, inspect the surrounding structure, flash and seal to current Collier County code, and set the new unit plumb and square. For a west-facing Gulf-front unit, a full frame replacement is the only way to address corrosion that has spread beyond the sash into the frame itself.
Insert Window Replacement
An insert replacement places a new window unit inside the existing frame. It works when the original frame is still sound and square, which we see most often in Pelican Bay homes built in the 1990s and early 2000s where only the glass and weatherstripping have failed. Inserts are less disruptive than full frame replacement because the interior and exterior trim stays intact. In a condominium, that matters. The fewer common-area touchpoints, the easier the Pelican Bay Foundation approval tends to be.
Vinyl Replacement Windows
Vinyl windows are a practical upgrade for Pelican Bay homeowners who want lower maintenance and better energy performance than the original aluminum frames deliver. Vinyl doesn’t corrode in salt air the way aluminum does, which matters on the west side of the community where Gulf exposure is constant. We quote vinyl alongside impact-rated glazing options so you can see the cost difference on paper. For non-impact openings on interior or protected elevations, a well-built vinyl unit with low-E glass makes real sense.
Energy-Efficient Upgrade
Most original Pelican Bay windows are single-pane units with no meaningful thermal break. Replacing them with low-E, argon-filled impact glass changes how the unit cools, and in a high-rise that’s the difference between a tower unit that holds temperature and one that runs constantly. We’ll show you the thermal performance ratings on each manufacturer line we quote, not just the design pressure numbers. The energy conversation matters in Pelican Bay because single-pane glass on a west-facing elevation is basically a heat collector. Upgrading to a properly rated unit changes that math from the first afternoon.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelican Bay
We install and service more than a dozen manufacturer lines, and for Pelican Bay we stock hardware and weatherstripping for the brands most common in this community’s original build: original aluminum sliders, early laminated glazing, and first-generation impact units. We’re an authorized installer for Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows. On impact-rated work in Pelican Bay’s wind zone, we recommend PGT and CGI for their glass interlayers and marine-grade hardware options, which hold up better against Gulf-front salt air than standard residential finishes. Side-by-side quotes on paper, so you see exactly what you’re buying.
Common Window Replacement Problems We See in Pelican Bay Homes
- Fogged glass in original single-pane and early laminated units. The seals on thirty- and forty-year-old units fail, and once moisture is between the panes, the glass cannot be repaired. Replacement is the fix. In a tower unit, the glass and frame often need to go together because the original frame wasn’t built to accept modern impact-rated glass thicknesses.
- Corroded aluminum frames and hardware on west-facing Gulf-front units. Salt air in Pelican Bay eats standard residential-grade aluminum. Hardware seizes, weatherstripping degrades, and the frame itself pits. The fix is marine-grade finish on hardware and either full frame replacement or a factory-finished frame that matches the Foundation’s approved palette.
- Stop-work orders from the Pelican Bay Foundation ARC. We see this on jobs where the homeowner or a contractor pulled a Collier County permit first, before getting architectural approval. The county flags the application, the Foundation issues the stop-work order for unapproved frame colors or tint, and the job stalls. The sequence is not optional here.
- High-rise logistics gone wrong. Trying to haul full-frame replacement units through a tower’s passenger elevator delays the job and can damage common areas, which triggers Foundation complaints. Elevator dimensions and weight limits rarely accommodate full-frame units. We schedule swing-stage work when the opening requires it, which keeps the job off the condominium’s common-area schedule.
Pricing for Window Replacement in Pelican Bay, FL
An honest range for Pelican Bay window replacement starts around $800 to $1,500 per window installed for a standard impact-rated unit. Impact single-hung windows run $900 to $1,800. Large or custom openings, including most Gulf-front sliders and picture windows, fall between $2,500 and $5,000 per opening. Whole-home packages in Pelican Bay’s single-family estate homes typically land between $8,000 and $25,000 or more depending on the number of openings, the wind-load rating required, and whether the project is full frame or insert replacement. The Pelican Bay driver on price is elevation and exposure: a west-facing tower unit with a 150 mph wind zone requirement needs a higher design pressure rating than an inland, ground-floor home, and that rating affects the glass, the frame, and the labor. We provide a written, line-item quote at no charge. Call (239) 326-9942 for a free in-home measure.
What Window Replacement Costs in Pelican Bay
We just covered numbers. Here’s what moves them in Pelican Bay specifically. Opening count is the big one; a tower unit with three sliders and two fixed windows is a different project than a single-family estate with fourteen openings. Floor height changes the labor. Upper-floor work from a swing-stage costs more than ground-level installs because of rigging time, crew certification, and scheduling. Frame material matters too. Marine-grade finishes on aluminum frames cost more than standard finishes but they’re the correct specification for Gulf-front elevations where salt air works on hardware year-round. And the wind-load rating drives glazing cost. Pelican Bay sits in a coastal high-wind zone with Collier County design wind speeds exceeding 150 mph at the shoreline, so the product must carry the right design pressure rating for your specific opening. No flat-rate guesswork. We measure every opening, pull the wind zone for your address, and quote the line items in writing. Call (239) 326-9942 to schedule a free measure.
We don’t sell hurricane shutters. We install permanent impact-rated glazing, which protects the opening without panels to hang or store. For Pelican Bay homeowners weighing impact windows against shutters, the permanent route means no pre-storm scramble, no HOA storage rules to navigate, and no annual hardware check. The window does the work every day, not just during a named storm.
Florida Pays You Back
State and federal programs can offset a meaningful slice of a Pelican Bay window replacement, but you should read the fine print and confirm with your own carrier or tax professional before you spend based on a rebate. The My Safe Florida Home program has offered matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida also offers a sales-tax exemption on impact-resistant windows and doors. The federal 25C energy credit can return 30% of product cost, up to $600 per year, on qualifying energy-efficient units. And after a wind-mitigation inspection, typically $75 to $150, many carriers apply a windstorm-premium credit that averages around 25% on the windstorm portion of the policy. These programs change. We’ll point you to the current forms and the right inspection path, but we won’t promise a check. That’s between you and the state or your carrier.
On the product-rating side, we quote every impact unit with its Miami-Dade NOA or Florida Product Approval number printed on the quote, per configuration. Design pressure ratings are matched to the opening, and we never quote a rating above +/-100. When someone throws around a “design pressure” number like 150 or 170, that’s a wind speed figure, not a PSF rating. We keep the two straight on paper so you do too.
We Also Serve Cities Near Pelican Bay
TruePane serves Pelican Bay and the surrounding coastal communities, including Naples, Marco Island, Bonita Springs, and Estero. If your property sits just outside the Pelican Bay Foundation’s boundary, the approval path may be simpler, but our standards don’t change. We run the same crews, the same warranty registration, and the same written quotes across the area. You can read more about our Window Replacement services or see how we approach Window Replacement in Pelican Bay specifically.
Serving Pelican Bay, FL - Our Local Coverage Area
We’re based in the Pelican Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Pelican Bay
Yes. Every exterior window and door replacement in Pelican Bay must clear the Pelican Bay Foundation’s Architectural Review Committee before Collier County will accept a permit application. The ARC reviews frame color, tint level, and product type against the community’s design standards. Pulling a county permit first is the single most common way Pelican Bay window jobs stall. We submit the product spec to the Foundation first, get written approval, then file with the county. Call (239) 326-9942 and we’ll walk the sequence with you for your building’s specific requirements.
Not typically. Fogged glass means the seal has failed, but if the frame is also corroded, replacing only the glass leaves a failing frame in place. The original aluminum frames in Pelican Bay’s Gulf-front towers were not built to accept modern impact-rated glass thicknesses, so a glass-only replacement often is not code-compliant or structurally sound. Full frame replacement addresses both the failed seal and the corroded frame. We’ll inspect the opening and tell you plainly whether a glass-only repair is viable in your unit. We won’t sell you a glass patch on a frame that needs to come out.
Pelican Bay sits in a coastal high-wind zone, with Collier County design wind speeds exceeding 150 mph at the shoreline. Your replacement windows and doors must carry a design pressure rating matched to your building’s exact location, elevation, and opening size. That’s a product-spec answer, not a guess. We pull the wind zone for your address, quote units with the correct PSF rating, and put the Miami-Dade NOA or Florida Product Approval number on the written quote. Call (239) 326-9942 for an exact quote on your openings.
For original owner-occupied homes built in the 1990s or later, a window replacement performed by a licensed contractor generally does not void the structural portions of a builder warranty. What voids warranties fast is improper installation that leads to water intrusion or frame failure. We install to current Florida building code, pull the required permits with Foundation approval in hand, and register both manufacturer warranty layers in writing on every job. We back the workmanship with our 90-Day Done Right Promise. Call (239) 326-9942 and we’ll walk through what your warranty says before the first window comes out.
Most Pelican Bay homeowners replacing original single-pane windows with low-E, impact-rated glass see a noticeable drop in cooling cost, especially in west-facing Gulf-front units where the afternoon sun loads the glass all day. Exact savings depend on your unit’s exposure, the glass package you choose, and your cooling habits. The thermal performance rating on each quoted manufacturer line tells the real story. We’ll show you the numbers on paper, side by side, before you commit to a product. Call (239) 326-9942 to schedule a free in-home measure and get a written quote with performance ratings included.
Contact Us for Window Replacement in Pelican Bay, FL
If you’re ready to replace original windows, corroded sliders, or fogged glass in Pelican Bay, start with a free in-home measure and a written quote. We’ll bring product samples, the wind-load numbers for your address, and the Pelican Bay Foundation approval checklist. Call (239) 326-9942 and a live person will answer. The estimate is free, the quote is written, and if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.